I get the home improvement bug every winter and this year was no exception. This time around I am updating my office, which is actually really a nice “family room” with a fireplace and sliding glass door that looks out onto a deck. It’s a great room, but my desk faced the corner and was bo-RING! So this year I changed my orientation for a better view. This left a big closet behind my desk. Like any good Pinterest fan, I’ve seen people do awesome things with closets and I decided to try it myself. But because my office was a significant room in my house, I wanted it to look classy. I found two inspiration nooks to use as a starting point: Whimages Built-In Nook and House of Rose Built-in Office Nook. These inspired me to create a built-in bench!
Transforming the Closet
Here’s what I began with:
And no, my closet was not that empty when I started! Ha HA! As if. I pulled out something like 40 board games — I kid you not. I love games. So this is the closet after I’d moved out most of the accumulated stuff that really didn’t need to be in my office.
It’s a decent size closet — about 7 feet wide by 2.5 feet deep. It seemed similar to the closets I saw in my inspiration images, except that it has a deeper section on one side. No problem — I can use that as a cozy reading area.
We began by removing the sliding doors and pulling out all the shelves. Sadly, the old wire shelves were screwed and anchored into the dry wall really well and pulling them out left fairly large holes. That meant some unexpected work in patching drywall and then filling in all the smaller holes.
Once that was done, I painted the entire interior of the closet RED! I used flat latex Valspar Signature because I think it covers very smoothly and isn’t super stinky. The red is called “Cherry Pickin’ (CI221) and it’s the same red I used to paint my desk. It’s a really awesome red because it’s warm and toned down ever so slightly from a regular red, but still rich and fun.
It was already a big improvement. But there was still more to do!
About My “Travel Desk”
(If you’re curious about this desk, it’s an upcycled desk made from a discarded table someone had put out on the curb. I know, right? The old mission table was broken, taller, and really quite a lot different from what you see here, but it was solid wood and seemed destined to be used. We chalk painted it red, added the whole front area, and installed a lighted, pull-out keyboard tray that you cannot see here. The travel posters on the front of the desk are all places I’ve visited! I plan to do a blog post on the desk itself when I get a chance.)
Shelving the Closet
The next step was to put shelves back into the closet. We were able to recycle most of the old wood that we’d pulled out — we made the new shelves less deep, but added more this time. They wrap around the sides of the closet, and are perfectly sized for my books.
I first painted the shelves with ultra white satin latex. I HATED it. It was way too bright and harsh. Who would have thought a white paint could be so wrong? So I repainted them with “Swiss Coffee” (7002-16), which is slightly warmer white and it made all the difference to me. Much better!
We also added a mini crackle glass pendant light in place of the boring and bare light bulb. This was a bit tricky because the old light had one of those pull chains (like this). We ended up installing the new light into the ceiling, and then attaching a new light socket adapter with a pull chain into the pendant lamp itself. That way the pendant light could still be turned on and off with a pull chain, but it was from the base of it, rather than from something on the ceiling. It’s working very well.
Making the Built-in Bench
I envisioned my nook with a built-in desk on the left side and a built-in bench on the right side. We figured we should start with the bench as it had the biggest footprint. We used old 2×4 wood leftover from our garage project a few years ago and some 3″ deck screws to make the sturdy base
The built-in bench base and frame is screwed into the walls and floor with the deck screws. They can be removed later, but it’s not going to be by accident, that’s for sure.
Once the built-in bench base was done, it was time to make it look prettier. I bought some 1/4″ thick furniture-grade plywood (about $8), some 1″x3″x36″ dimensional poplar wood (4 @ 3.88 each), some 3/4″ decorative shoe moulding (about $12), and a piece of furniture-grade pine board measuring 2′ x 4′ x 1″ ($22). From these things, we were able to make the decorative sides and the hinged top.
Creating Fancy Panels for the Built-In Bench
I learned a lot making the sides of the built-in bench and I want to write it down so I don’t forget. They look fancier than they are. First we cut the two front panels to the size size as the frame. Then we attached the 1 x 3 boards around the edges of each of these cut panels, making a sort of frame. And then inside that frame we placed the decorative shoe moulding — these had to be mitered on the corners so they fit neatly together. The end result was very pretty and professional looking. I didn’t realize it could be so easy.
After attaching the side panels to the built-in bench, it was time to make the seat. The two inspiration nooks have fixed seats, as far as I can tell, but I just couldn’t stomach the idea of all that wasted space inside the benches. So instead we made a hinged lid. It was harder, but now I have a gigantic storage space that is nicely tucked out of sight.
Making the Hinged Seat
To make the hinged seat of the built-in bench, we cut the seat board to size so there would be a 1″ overhang on the front and the angled section. Not only does that 1″ overhang give the bench a nicer look, but it is your handle for the lid as well. Once it was cut to size, we cut 3″ off the left side of the seat, and then back 5″ off the back of the seat. Before I went any further, I painted everything.
Next, the side 2″ strip previously cut was nailed onto the left side of the top of the built-in bench frame and the back 5″ strip was nailed onto the back of the bench frame top, forming a sort of frame for the hinged lid. Then we attached three 12″ piano (continuous) brass hinges to the side of the back strip and the side of the seat lid. This way the lid is hinged securely, but also rests on three parts of the bench frame (a bit of left side, all of the ride side, and all of the front) for maximum support.
And voila! I have a built-in bench seat that is pretty, sturdy, and practical. I need to make it a custom-sized cushion still. Perhaps a cushion with a cover made from recycled sweaters? Muahahaha! (Update: Oh, yes, I did this!)
Many thanks to Greg who helped tremendously with this project. I couldn’t have done it without you.
Now I need to make that desk…
In the meantime, here’s a Pinterest style graphic to share so others can learn from what I did, just as I learned from them!
If you have any questions, just let me know. It wasn’t really that hard to make and I’m SO excited to have it!